GNU findutils NEWS - User visible changes.      -*- outline -*- (allout)

* Noteworthy changes in release 4.10.0 (2024-06-01) [stable]

** Bug Fixes

  Find now defaults to optimization level 1 rather than 2 and the
  cost-based optimizer will only run at level 2 and above.  This
  should prevent changes of operation order which result in
  user-visible differences in behaviour. [#58427]

  If the -P option to xargs is not used, xargs will not change the way
  in which the SIGUSR1 and SIGUSR2 signals are handled.  This means
  that they will cause the program to terminate if the signals were
  not ignored in the process which started xargs.  This also means that
  xargs does not use parallel execution at all.
  If you start xargs with '-P 1', then xargs will not be killed by these
  signals, and they instead change the degree of parallelism.
  This change improves xargs' POSIX compliance.

  'xargs -P' now waits for all its child processes to complete before
  exiting, even if one of them exits with status 255. [#64451]

  If the -P option of xargs is in use, reads on standard input which are
  interrupted by a signal are re-started. [#64442]

  'find -name /' no longer outputs a warning, because that is a valid pattern
  to match the root directory "/".  Previously, a diagnostic falsely claimed
  that this pattern would not match anything. [#62227]

  'find -gid' (without the mandatory argument) now outputs a correct error
  diagnostic.  Previously it output: "find: invalid argument `-gid' to `-gid'".
  The error diagnostic for non-numeric arguments has been improved as well.
  Likewise for -inum, -links and -uid.

  'find -user' and 'find -group' now allow to specify larger UIDs/GIDs.
  Previously, that was limited to INT_MAX, although the types uid_t and gid_t
  are larger on many systems, including x86_64 GNU/Linux. [#64900]

  'find -xtype l' no longer fails on symbolic links that point to
  themselves.  These are treated similarly to broken links. [#51926]

** Improvements

  The find predicates -used, -amin, -cmin, -mmin, -atime, -ctime, and -mtime
  now properly diagnose a not-a-number argument.  Previously, find dumped
  core via an assertion.  [#64717]

** Changes to the build process

  findutils now builds again on systems with musl-libc.
  This requires gettext-0.19.8.

  findutils programs no longer fail for timestamps past the year 2038
  on obsolete configurations with 32-bit signed time_t, because the
  build procedure now rejects these configurations.
  On systems without any year2038 support configure with --disable-year2038.

** Documentation Changes

  When generating the Texinfo manual, `makeinfo` is invoked with the --no-split
  option for all output formats now; this avoids files like find.info-[12].

  The xargs documentation now describes the double dash "--" option delimiter.

  The xargs examples in the Texinfo manual now use the -L and --replace options
  instead of the deprecated -l and -i options.  [#64480]

  The TexInfo manual now uses upper-case 'B' as birthtime for the -newerXY
  comparison consistently.  [#65378]

** Translations

Updated the following translations: Belarusian, Brazilian Portuguese,
Bulgarian, Catalan, Chinese (simplified), Chinese (traditional),
Croatian, Czech, Danish, Dutch, Esperanto, Estonian, Finnish, French,
Galician, Georgian, German, Greek, Hungarian, Indonesian, Irish,
Italian, Japanese, Korean, Lithuanian, Luganda, Malay, Norwegian
Bokmaal, Polish, Portuguese, Romanian, Russian, Serbian, Slovak,
Slovenian, Spanish, Swedish, Turkish, Ukrainian, Vietnamese.


* Noteworthy changes in release 4.9.0 (2022-02-22) [stable]

** New features in find

  find now supports the -files0-from option to be able to safely pass an
  arbitrary number of starting points to the tool.  The option requires a file
  name as argument, or "-" to read from standard input.  The entries in that
  file have to be separated by NUL characters. [#60383]

** Changes in locate / updatedb

  updatedb now skips (fuse-mounted) s3fs filesystems by default,
  i.e., unless PRUNEFS is set.

** Bug Fixes

  'find -D stat -L ...' no longer determines SELinux security information as
  if the -L option was not given.
  [Bug present since the SELinux implementation in 4.5.6]

  'find -inum' and 'find -printf %i' now also work on platforms which allow
  the inode number Zero; e.g. the GNU/Hurd uses inode number 0 for /dev/console.
  Previously, find(1) would abort when visiting such a file.
  [Bug present since FINDUTILS_4_5_4-1.]

  findutils-4.8.0 failed to build on some MacOS versions.
  Fixed by a gnulib update. [#59972, #59991]

** Documentation Changes

  The find.1 man page and the Texinfo manual now show environment variables
  in a consistent style. [#59963]

  Furthermore, both add the description of the -printf format directive '%B',
  for a file's birth time, and its limitations. [#61327]

  The description of the -delete action has been improved and aligned among
  the manual page and the Texinfo documentation. [#61774]

  Various other documentation fixes - syntax issues and typos.
  [#61303, #60823, #61341]

  The output of 'find --help' now reads better.

  The HTML online manual is using the official GNU stylesheet again.

** Changes to the build process

  The find version without FTS, oldfind, has been completely removed.  It has
  not been installed since 4.5.18 (2015), and was only still used in tests.


* Noteworthy changes in release 4.8.0 (2021-01-09) [stable]

** Changes in xargs

'xargs -t' no longer outputs a trailing blank to stderr after the last argument
of each constructed command line to be executed.  [#57291]

xargs now warns when more than one of the conflicting options --max-lines (-L,
-l), --replace (-i/-I) and --max-args (-n) are specified on the command line.
[#52137]

** Bug Fixes

find no longer crashes when an XFS filesystem is heavily changed during the run.
Discussed at: <https://lists.gnu.org/r/bug-gnulib/2020-04/msg00068.html>

find -used works again.  This predicate was not working properly since adding
the support for sub-second timestamp resolution for various predicates in
FINDUTILS_4_3_3-1 back in 2007.
Discussed at: <https://lists.gnu.org/r/bug-findutils/2019-11/msg00010.html>

** Improvements

'find -D exec' now diagnoses all -exec, -execdir, -ok and -okdir runs including
the call arguments and the exit code of the launched process. [#59083]

** Documentation Changes

The documentation of 'find -printf %Ak' has been improved: it now refers to the
strftime(3) documentation for a complete list of supported conversion
specifiers, and documents the 'F' conversion specifier ('yyyy-mm-dd').

The man pages (find.1, locate.1, locatedb.5, updatedb.1, and xargs.1) now
consistently end with the sections "REPORTING BUGS", "COPYRIGHT" and "SEE ALSO",
with the latter referring to the online page on the GNU web server.

The "EXAMPLES" section in the find.1 man page now shows the examples in a better
structure and uses consistent formatting.

Various man page fixes - syntax issues and typos.
[#59745, #59330, #59012, #58193, #57807, #57775]

Other documentation changes:

#58654: doc: clarify that 'find -perm +MODE' is unrelated to umask

#58458: doc: improve section 'Hard links', especially fix the description
        regarding 'find -L -samefile FILE'.

#58205: find.1: clarify double dash '--' option

#58149: 'xargs --help' now mentions that --replace (-I, -i) splits the input
        at newline characters.

#57025: doc: enhance description of tests accepting numeric arguments in find.1
        [see also #49640].

#54730: Add additional valuable example of find -quit

#48135: Fix testsuite error on Hurd and BSD related to ln

#35253: Clarify descriptions of -printf %f, %h.

** Changes to the build process

The configure option --without-fts has been removed.  The attempt to use
it stopped configure with an error message since 4.5.18 (2015) anyway.


* Major changes in release 4.7.0, 2019-08-29

** Changes to locate / updatedb

Support for generating old-format databases (with updatedb
--old-format or updatedb --dbformat=old) has been removed.  The old
database format was deprecated in 2007 (and updatedb has warned about
this since that time).  The locate program will will read old-format
databases, though this support also will be removed.

The updatedb script now operates in the C locale only.  This means
that character encoding issues are now not likely to cause sort to
fail.  It also honours the TMPDIR environment variable if that was
set, and no longer sorts file names case-insensitively.

The (unspecified) order in which filenames are stored in the locate
database is now different to previous versions.  However, you should
not rely on locate's output appearing in any particular order in any
case.

** Improvements

All utilities now only show the full usage text when requested via
the --help option.  Previously, when the user passed invalid options
or arguments, the user's attention to the corresponding error
diagnostic was distracted by that lengthy text.

find now accepts multiple file type arguments to the -type and -xtype
options separated by comma ','.  For example, to search for symbolic
links and directories simply provide the shorter '-type l,d' instead
of the - yet more portable - '( -type l -o -type d )'.

find now diagnoses failures returned by readdir().  This bug was inherent
in the use of FTS.

find now exits in more cases immediately after the error diagnostic, i.e.,
without the following usage text, to make the former more eye-catching.

find now outputs a better hint in case the user passed an unquoted shell-
glob pattern to options like -name, i.e., when the offending argument is
an existing file.

find now supports the debug option '-D all' to include all of the other
debug options at once.

xargs now supports the -o, --open-tty option to reopen stdin as /dev/tty
in the child process before executing the command; useful to run an
interactive application.  Added for compatibility with BSD.

xargs now supports the GNU_FINDUTILS_FD_LEAK_CHECK environment
variable to enable/disable fd leak check.

'xargs -t' (--verbose) now properly quotes each part of the command to the
executed if needed when printing it to stderr; likewise -p (--interactive).

** Documentation Changes

Prefer https:// over http:// links where possible, e.g. for '*.gnu.org' servers.

Both find.1 and the find texinfo manual now consistently document all of the
'N', 'L' and '?' possibilities in '-printf %Y' output when the determination of
the type of a symlink target fails.

find.1 now correctly states the -prune has no effect when the -depth option is
given.  Before, it wrongly stated that -prune would return false in that case.

Some minor documentation improvements are listed in "Bug Fixes" below.

** Bug Fixes

#56820: find: improve diagnostic when a global option like -maxdepth is
        specified after another argument like a test, thus hopefully avoiding
        translation issues (at least French, German).

#56142: doc: fix bug #56142 by specifying which actions inhibit the
        default -print.

#55272: find: improve diagnostic when -name or -iname is used with a pattern
        containing a directory separator ('/'), suggesting to use -wholename
        or -iwholename respectively.

#54859: doc: fix typo in 'xargs -l' examples in texinfo manual.
        Change from 'xargs -1' (minus one) to 'xargs -l' (minus El) in 3 places.

#54838: doc: fix the examples of the -perm option in the texinfo documentation.
        The example '-perm -g+w,o+w' was misplaced.
        Bug present since FINDUTILS_4_2_27-1.

#54262: 'find -printf "%Y"' now correctly outputs 'N' for broken symlinks
        (ENOENT or ENOTDIR).  Previously, it output 'l' in such a case.
        Bug introduced while attempting to fix #29460 in version v4.5.8.

#54171: 'find -depth' now outputs the name of unreadable directories.
        Previously, FTS-based find missed to output those entries.
        Bug present since the FTS implementation in FINDUTILS_4_3_0-1.

#52981: find: the '-delete' action no longer complains about disappeared files
        when the '-ignore_readdir_race' option is given, too.  That action will
        also returns true in such a case now.

#52220: 'find -D' without any further argument no longer crashes.
        Bug present since the implementation of -D in FINDUTILS_4_3_1-1.

#51304: doc: use correct IEC unit prefixes in the documentation of 'find -size'.
        find(1) uses binary-based units for the suffixes 'k', 'M', and 'G' of
        the argument of the '-size' option: 1024, 1024*1024 and 1024^3.
        Therefore, the documentation should use the correct IEC prefixes
        kibibyte, mebibyte and gibibyte respectively (or their abbreviations
        'KiB', 'MiB' and 'GiB').

#50758: doc: fix the description of the -perm examples matching the permission
        mode "022" in find's texinfo manual: the match is for the file's group
        and 'other' mode bits instead of for user and group.
        Bug introduced when adding the -perm examples in FINDUTILS-4.2.11.

#50326: find no longer leaks memory for a recently added member in gnulib's
        mount list structure.

#50259: find -printf '%h' now outputs the correct path for arguments with one or
        more trailing slashes.  Previously, it would e.g. output "foo" instead
        of "." when "foo/" was passed; likewise, it would output "/user/xxx/"
        instead of "/user" when "/user/xxx//" was passed.
        Bug introduced in FINDUTILS-4.2.19.

#48180: find -noop (an internal option not intended to be exposed to the user)
        no longer crashes.  Bug introduced in FINDUTILS-4.3.1.

#48030: find -exec + does not pass all arguments for certain specific filename
        lengths.  After the internal (usually 128k) buffer is full and find(1)
        executed the given command with these arguments, it would miss to run
        the command yet another time if only one other file argument has to be
        processed.  Bug introduced in FINDUTILS-4.2.12.

#46784: frcode drops last char if no final newline

** Changes to the build process

The configure option --enable-id-cache has been removed.  It has been
a no-op since findnutils-4.5.15.

The configure option --enable-debug has been removed.  Debugging in
find is now controlled by its -D option only.

The configure option --enable-silent-rules is the default now.
Use --disable-silent-rules or "make V=1" to get verbose build output.

"make dist" no longer builds .tar.gz files.
xz is portable enough and in wide-enough use that distributing
only .tar.xz files is enough.

Maintainer builds from the Git repository now derive the version string from
the version control system instead of using a fixed string (changed after each
release manually).  As a result, the inter-release builds can now be
distinguished: e.g. "4.6.0.152-fe9c" is the 152th commit after the tag "v4.6.0"
and has the Git short hash "fe9c".  Builds from an unclean tree are marked with
the suffix "-dirty".

The translation files in the PO directory are no longer version controlled;
instead bootstrap auto-updates them from "translationproject.org" during a
maintainer build.

A shell-style test framework borrowed from GNU coreutils has been added.
This allows better tests with more control over stdin, stdout, stderr,
signals, preparatory steps, cleanup, return code verification, root-only
tests, etc.


* Major changes in release 4.6.0, 2015-12-28

** Stable Release

This is the first stable release since findutils-4.4.2.  The entries
below in this file detail the changes that have occurred since release
4.3.13 (which is the common ancestor of this release and
findutils-4.4.0).  This release includes all the bug fixes
incorporated into the 4.4.x release series, since those bug fixes were
also applied to the 4.5.x release series.

** Summary of Changes

The most significant changes since the 4.4.2 release are:

1. Some backward-incompatible changes have been made to find:
  - egrep regular expressions now work like GNU grep -E
  - Minor changes to the way nanoseconds fields are printed
  - find -perm +mode is now fully POSIX compliant (if you want the old
    behaviour use -perm /mode).
  - find -perm +numeric_mode is not supported any more. This syntax is
    unspecified by POSIX. The prior functionality continues to be
    available with -perm /numeric_mode. For more details see Savannah
    bug #38474.

2. Some backward-incompatible changes have been made to xargs:
  - if the child exits with status 126 or 127, xargs exits with status
    123.

3. There are also a large number of bugfixes, performance enhancements
   and documentation improvements, as detailed below.

4. The "oldfind" binary is no longer installed.

** Translations

Updated the Danish translation.

* Major changes in release 4.5.19, 2015-12-28

** Bug Fixes:

Applied patch #8688: Spelling fixes.

* Major changes in release 4.5.18, 2015-12-27

** Changes to find

Only the ftsfind binary will be installed, as "find".  Installing
oldfind, under any name, is no longer supported.  The configure option
--with-fts is still allowed, but trying to use it to enable the
installation of oldfind (for example by using --with-fts=no) results
in configure stopping with an error message.

** Translations

Updated the Slovenian translation.

* Major changes in release 4.5.17, 2015-12-24

** Future Changes to Release Signing Keys

Future findutils releases will be signed with a new GPG key, though
this release will be signed with the existing key.  Here are the old
and new key fingerprints:

pub   1024R/64A95EE5 1996-04-04
      Key fingerprint = 0C 1C D7 CA 66 33 D2 E9  14 E0 5F 16 D5 24 60 E9
uid                  James Youngman <jay@gnu.org>
uid                  James Youngman <JYoungman@vggas.com>

pub   4096R/C5DDACB9 2015-12-24
      Key fingerprint = 0CF4 E8D8 7159 3224 8428  32B8 88DD 9E08 C5DD ACB9
uid                  James Youngman <james@youngman.org>
uid                  James Youngman <jay@gnu.org>
sub   4096R/771CE15D 2015-12-24

** Functional changes to find
When the POSIXLY_CORRECT environment variable is set, a warning is no
longer issued when '/' is found in the argument to -name.  Use of
POSIXLY_CORRECT also turns off warnings about use of the deprecated
option -d  and the use of global options in surprising positions.

** Documentation Changes
The EXPRESSION section of the find manpage is now organised somewhat
more clearly.  The -regextype option is now correctly documented as
being positional.

** Bug Fixes:
When the -a option of xargs is used, xargs no longer leaks a file
descriptor (fixing a bug reported by Kyle Sallee).

** Translations

Updated the Brazilian Portuguese and Serbian translations.

* Major changes in release 4.5.16, 2015-12-23

** Functional Changes to find
Using -regextype egrep now has the same effect as -regextype
posix-egrep.  This is the result of a change to gnulib to bring it
into line with GNU grep (see https://debbugs.gnu.org/20974#22).

** Translations
Updated translations: Estonian, Swedish, Polish, Vietnamese, Ukranian,
Norwegian Bokmaal, Czech, Russian, French, Hungarian.

** Bug Fixes:
#46715: testsuite error with perl 5.22, gnulib outdated

#40146: gnulib revision doesn't support musl libc

* Major changes in release 4.5.15, 2015-12-18

** Bug Fixes
#45780: inode column is badly aligned when running 'find <dir> -ls'

#45585: unclear description of -newerXY in manual page.

#45505: give a more explicit error message when the argument to -regex
        is not a valid regular expression.

#45090: oldfind incorrectly omits test/..test (or any file whose name
        begins with ..).

#45065: find incorrectly prints a leading zero on the fractional part
        of ctime timestamps

#45064: Use of [[ ... ]] in /bin/sh script is incorrect

#45062: Enabling CACHE_IDS causes segfaults (this bug affects many
        historic releases, probably since release 3.0 in 1991).  You
        would not have been affected by this problem unless you used
        the option --enable-id-cache when invoking confgure.

#42903: checklists.py now supports Python 3.

#40805: The locatedb manual page uses now troff symbols where
        appropriate.

** Translations

Updated the German translation.

* Major changes in release 4.5.14, 2014-07-19

** Bug Fixes

#42793: "Failed to write output" with -ls (this bug affected only
        release 4.5.13).

* Major changes in release 4.5.13, 2014-07-16

** Documentation Changes

Some minor documentation improvements are listed in "Bug Fixes" below.

** Bug Fixes

#40339: Fix leaked directory handle when listing mounted file
        systems.

#40094: The xargs --help output has a small number of cosmetic
        improvements.

#39197: Small fix to find's manual page to remove an unwanted
        backslash, which made the troff incompatible with Eric
        Raymond's doclifter software.

#39162: -printf reads beyond arguments terminated by \

#35753: Check the success/failure of material I/O operations where
        these are important to the use of the output (i.e. check the
        output for "find -ok" but not debugging output).

#31005: The find manual page and Texinfo manual now more clearly state
        that -exec ... + always returns true.


** Translations

Updated translations: Estonian, Polish, Ukranian.


* Major changes in release 4.5.12, 2013-09-22

** Functional Changes to find

The GNU extension "find ... -perm /MODE" is no longer disabled when
the POSIXLY_CORRECT environment variable is set.

The obsolete GNU extension "find ... -perm +MODE", which was withdrawn
in release 4.2.21 in 2005 due to compatibility problems, has been
completely removed.  Use "find ... -perm /MODE" instead.

** Documentation Changes

If you use -type or -xtype with a type letter corresponding to a file
type which is not supported by the system on which find was compiled,
find will now give a clearer error message (though the functionality
is unchanged).  Type letters are affected are D, l and p (for Solaris
Doors, symbolic links and named pipes respectively).

The output of xargs --help has been slightly changed for greater
clarity.

The documentation for xargs now warns about parallel processes (xargs
-P) sharing stdout.

The documentation for find -execdir now describes correctly that the
command will be executed in the same directory as the file we were
considering at the time.  The documentation previously (and
incorrectly) stated that the original working directory of find would
be used.

** Bug Fixes

Some bugs in 4.5.11 were fixed without adding them to the bug
database, though they are in the ChangeLog:

*** Use of [[ ... ]] in find/testsuite/sv-bug-32043.sh

*** Don't delete header files in "lib/" for "make clean".

*** xargs: wait for process before prompting in interactive mode (-p)

These following fixed bugs are recorded at
https://savannah.gnu.org/bugs/?group=findutils:

#40088: potential buffer overflow in -execdir and -okdir

#39324: exits without error on OOM

#38583: errno-buffer read failed in xargs_do_exec

#38474: Unintended (?) behaviour change of -perm +mode predicate

#36652: Better document that -0/-d turns off the effect of -E.

#34976: find -execdir leaks file descriptors for the working directory


* Major changes in release 4.5.11, 2013-02-02

** Documentation Changes

The Texinfo manual and the find manual pafe now explain why two find
binaries (either 'find' and 'oldfind', or 'find' and 'ftsfind') are
installed.  A manual page for either ftsfind or oldfind is also
installed, whichever is appropriate.

** Bug Fixes

#34079: Apply gnulib ftw memory fix

#33384: If rm/chmod etc. are not in /bin or /usr/bin, updatedb fails

#18227: find -ls does not display device major/minor numbers.

#29698: Correct and clarify documentation of xargs -d option

#32887: Present xargs options alphabetically like in GNU cp(1) etc

#14386: updatedb relies on mktemp, which is not portable.

#32043: find -name [ doesn't obey posix

#37926: The -inum predicate previously gave wrong results in oldfind
        (ftsfind, the default find binary, was unaffected).

** Functional Changes to xargs

If no utility is specified, xargs now calls "echo" (and searches on
$PATH to find it) rather than "/bin/echo".  This may give rise to
subtle behaviour differences for some users.   To avoid unexpected
surprises, just explicitly specify the utility you would like to run.
For example use "xargs /bin/echo < foo" rather than "xargs < foo".

A new option is provided, --process-slot-var.  If you set this, xargs
will set the indicated environment variable in each child.  The values
are re-used, but no executing child process will have the same value
as another executing child process.  This wishlist item was Savannah
bug #29512.

** Functional Changes to find

For find -printf, the format specifiers %{, %[ and %( are all now
reserved for future use.  Previously these would print {, [ and (
respectively, but in any case those characters can just be printed
literally like this: find -printf "{[(".  Code changes intended to
explain that these are reserved went into findutils-4.5.5, but this
code had, before now, had no effect.

When expanding "-printf '%F'", find reads /etc/mtab.  We now take the
last match found in this file, rather than the first, to better deal
with implementations which have duplicate entries (for example
/proc/mounts on systems running the Linux kernel).

Both oldfind and ftsfind now use less heap memory when processing
directories containing very many files.  However, oldfind now uses one
file descriptor per recursive subdirectory level, which will further
limit the depth of directory trees it can search.  If you need find to
be able to search deep directory trees, use ftsfind (this is, by
default the binary built and installed as 'find').

The behaviour of the "awk", "posix-awk" and "gnu-awk" regular
expression types selected by the -regextype option have slightly
changed, to bring them into line with the behaviour of the GNU C
library.  For "awk", character classes (such as [[:digit:]]) are now
supported.  For "gnu-awk" and "posix-awk", intervals are supported and
invalid interval specifcations are treated as literals (for example
'a{1' is treated as 'a\{1').


* Major changes in release 4.5.10, 2011-05-11

** Documentation Changes

The manual now includes a small number of references to further
reading on security.

** Bug Fixes

#30608: Automagic dependency on selinux.  The configure script now
provides a --without-selinux option.

#29949: find -execdir does not change working directory

#31359: test-strstr unit test fails on alpha.

#30777: find -exec echo TURNIP{} \+ is accepted but TURNIP is eaten

#30180: error message from incorrect -size option is off

#29828: test suite deadlock on FreeBSD.

** Translations

Updated translations: Finnish, Italian, Danish, Slovenian, German,
Estonian, French, Japanese, Danish.

* Major changes in release 4.5.9, 2010-04-29

** Bug Fixes

#29593: Make import-gnulib.sh work under a POSIX shell.

#29511: fails to build on kfreebsd-*

#27563: -L breaks -execdir

#19593: -execdir .... {} + has suboptimal performance (see below)

** Translations

Updated translations: Chinese (simplified).

** Performance changes

The find program will once again build argument lists longer than 1
with "-execdir ...+".  The upper limit of 1 argument for execdir was
introduced as a workaround in findutils-4.3.4.   The limit is now
removed, but find still does not issue the maximum possible number of
arguments, since an exec will occur each time find encounters a
subdirectory (if at least one argument is pending).

** Functional enhancements to xargs

You can now increase the parallelism of xargs in mid-run by sending
it SIGUSR1, and decrease the parallelism with SIGUSR2.

* Major changes in release 4.5.8, 2010-04-07

** Bug Fixes

#29460: -printf %Y fails in $CWD-dependent way

#27974: Use gnulib's xreadlinkat support

#29435: fd_is_cloexec does not work on Fedora buildhosts

#27221: symlink_loop check broken by FTS_CWDFD

#27213: avoid failed assertions for non-executable directories.

** Translations

Updated Vietnamese, Czech, Dutch, Polish, Russian translations.

* Major changes in release 4.5.7, 2010-04-03

** Performance changes

If you use the -fstype FOO predicate and specify a filsystem type FOO
which is not known (e.g. present in /etc/mtab) at the time find
starts, that predicate is now equivalent to -false.  This substitution
currently occurs at optimisation level 2 and above.

** Translations

Copyright headers in the translation files have been updated.  Some
additional messages have been marked for translation.  However, there
have not been any changes to translation text.  The main purpose of
this release is to provide a base for updated translations.

* Major changes in release 4.5.6b, 2010-03-30

This is a replacement release for 4.5.6, which is not available by FTP
since it contains Makefiles which are vulnerable to CVE-2009-4029.

* Major changes in release 4.5.6, 2010-03-30

** Functional Enhancements to find

patch #4848: Patch - Support for SELinux

** Bug Fixes

#29089: SELinux --context and %Z options

#28872: Mistake in "#safer" example in "Problems with -exec and
        filenames" section of the Texinfo manual.

#28824: Corrected error message for "-ctime x".
        Likewise for -gid, -inum, -links, -mmin, -cmin, -amin,
        -uid, -used, -atime, -mtime, -ctime.

#27975: Infinite loop for -exec [..] {} +.

#27846: Assertion failure in xargs.c on AIX.

#27375: Open file descriptors leak into child processes.

#27017: find -D opt / -fstype ext3 -print , -quit coredumps

#27328: segfault if the initial exec for "find -exec" fails.

#27017: find -D opt / -fstype ext3 -print , -quit coredumps.

#26868: compilation error in pred.c on Solaris x86_64

#24873: Duplicate fprint option corrupts output

#23920: warn about un-matchable -path arguments ending in /.

#19120: Patch to fix single quotes in man page find(1)

** Documentation Changes

#26327: xargs man page is vague about the number of times command is executed.

* Major changes in release 4.5.5, 2009-07-06

xargs now handles the case where the system's actual exec limits are
smaller than the value of ARG_MAX at compile time.  Very few platforms
normally have this property, but it is possible to configure some Unix
systems this way.

** Bug Fixes

#25359: files/testsuite/find.gnu/posix-h.exp tests fail

#26587: Fix a typo in -execdir documentation (it says -exec by mistake
in the text).

#26537: find -prune now makes sure it has valid stat() information.

#22708: Exit status 126 and 127 from the utility invoked from xargs
now makes xargs return 123, meaning that exit status values 126 and
127 now unambigously mean that the utility could not be run or could
not be found, respectively.

** Documentation Changes

The -wholename option to find is no longer preferred over -ipath.


* Major changes in release 4.5.4, 2009-03-10

** Performance changes

The ftsfind executable (which is built by default as "find") now calls
fts() in such a way that it avoids calling stat() on directory
entries, if it doesn't need the information.  This can produce a
significant speedup on filesystems which don't populate the d_type
element of struct dirent, for example reiserfs.  Anecdotal evidence
suggests this can speed updatedb up from about 30 minutes to 3-4
minutes.

The ftsfind executable also now avoids calling stat() functions to
discover the inode number of a file, if we already read this
information from the directory.  This does provide a speed-up, but
only for a restricted set of commands such as "find . -inum 4001".
This fix is listed below as bug #24342.

** Bug Fixes

#25764: remove duplicate entry for 'proc' in updatedb's $PRUNEFS.

#25359: find -H wrongly behaves like -L sometimes; this bug affects
only filesystems which populate d_type and affects -type and -printf
%y.   This does not affect the default behaviour of find or find -P.

#25144: Misleading error message when argument to find -user is an
unknown user or is missing.

#25154: Allow compilation with C compilers that don't allow
declarations to follow statements.

#24342: -inum predicate shoud use dirent.d_ino instead of stat.st_ino
(this is a performance bug).

** Translations

Updated translations for Bulgarian, German, Irish, Hungarian,
Lithuanian, Dutch, Polish, Slovenian, Swedish, Turkish, Ukranian,
Vietnamese.

** Documentation Changes

The file README-CVS has been renamed to README-hacking and improved.

* Major changes in release 4.5.3, 2008-12-07

** Bug Fixes

#24283: find-4.5.2 -printf %TY causes NULL pointer dereference

** Performance changes

Changes to gnulib's fts code should provide performance improvements
in find when processing very large directories (for example
directories containing significantly more than 10000 filenames).
Performance imporvements may only exist for some find command lines
(performance testing was done for the fts implementation itself but
we haven't done the analogous performance tests in find).

File type information is also passed back from fts to find, saving
calls to the stat system call for find command lines which don't need
the stat information.  This provides a performance improvement for
common cases like "find . -type d".

* Major changes in release 4.5.2, 2008-09-07

** Bug Fixes

#24169: find would segfault if the -newerXY test was not followed by
any argument.

#23996: integer overflow on some platforms when parsing "-used 3".

** Documentation Enhancements

#23070: Corrected manpage description of find -perm /000 (the change
was already made but the manpage indicated the change would happen
"soon").

** Translations

Updated translation: French, Indonesian.
New translation: Czech.

* Major changes in release 4.5.1, 2008-06-21

** Bug Fixes

#22662: find -printf %AX appends nanoseconds in the right place now.

#23663: crash in some locales for -printf %AX (this problem seems to
have affected only the CVS code, and not any public releases).

** Translations

New translation: Lithuanian.

Updated translations: Chinese (simplified).

** Documentation Enhancements

Added a worked example describing how to find the shallowest instances
of a given directory name (or names) in a directory hierarchy.

* Major changes in release 4.5.0, 2008-05-21

** Functional Enhancements to find

If the POSIXLY_CORRECT environment variable is set, the system's
definition of "yes" and "no" responses are used to interpret the
response to questions from -ok and -okdir.  The default is still to
use information from the findutils message translations.

** Enhancements

If xargs find that exec fails because the argument size limit it
calculated is larger than the system's actual maximum, it now adapts
by passing fewer arguments (as opposed to failing).

** Performance changes

The default optimisation level for find is now -O2 instead of -O0,
meaning that a number of additional optimisations are performed by
default.   Current optimisations at each level are:

0:      Perform -name, -path, -iname, -ipath before other checks.
1:      Expressions containing only cost-free tests are evaluated
        before expressions which contain more costly tests.
2:      Bring forward all tests that need to know the type of a file
        but don't need to stat it.
3:      All tests are ordered by their estimated cost.

Cost here is simply an estimate of how time consuming the I/O
operations needed to make a test are.

** Bug Fixes


#22662: nanoseconds wrongly appended after "PM" for find -printf %AX
in locale en_US.UTF-8.

#15472: Error messages that print ino_t values are no longer truncated
on platforms with 64-bit ino_t.

On some systems without support for a boolean type (for example some
versions of the AIX C compiler), find's regular expression
implementation fails to support case-insensitive regular expression
matching, causing -iregex to behave like -regex.  This is now fixed.

** Documentation Changes

#20873: Indicate that * matches / and leading dot in filenames for
"find -path".

Both the Texinfo manual and the find manual page now include a more
precise description of how your locale configuration affects the
interpretation of regular expressions and how your response to prompts
from the -ok action are interpreted.

* Major changes in release 4.3.13, 2008-02-14

** Bug Fixes

#22057: Actually rename the old locate database to the new one
atomically, instead of just claiming the rename is atomic in a
comment.

#22056: -Xtime tests are off by one second (e.g. rm -f x; touch x;
find x -mtime 0 should print x).

#21960: xargs should collect the exit status of child processes even if
the total count of unreaped children has not yet reached the maximum
allowed.

** Documentation Fixes

Documented various useful techniques with invoking "sh -c" from
xargs in the Texinfo documentation.

** Translations

Updated the German, Irish, Dutch, Polish and Vietnamese translations.


* Major changes in release 4.3.12, 2007-12-19

** Bug Fixes

#15384: Find misbehaves when parent directory is not readable.

** Documentation Fixes

More examples in the xargs manual page, including a portable analogue
for BSD's "xargs -o".

** Translations

Updated translations: Polish, Dutch, Portuguese, Swedish, Vietnamese.


* Major changes in release 4.3.11, 2007-12-02

** Functional changes

When the POSIXLY_CORRECT environment variable is set, "find -perm
+a+w" is rejected as invalid.  Some other similar mode strings
starting with '+' which are not valid in POSIX are also rejected.

The -prune action now always evaluates as true (this is also a
bugfix).


** Bug Fixes

#21568: Switch to checking the gnulib code out with native git, not
CVS.  This affects mainly those who check findutils code out of CVS.
This is not the first time this bug has been fixed (the previous fix
used "cvs update -D", which git-cvspserver silently does not
support).

#21039: Setting the POSIXLY_CORRECT environment variable now turns off
warnings by default, because POSIX requires that only diagnostic
messages (and -ok prompts) are printed on STDERR, and diagnostic
messages must also result in a nonzero exit status.

#20970: Trailing slash on directory arguments breaks -name.  "find
foo/ -name foo" now correctly matches foo and printf foo/.  See POSIX
interp http://www.opengroup.org/austin/interps/uploads/40/14959/AI-186.txt

#20865: Using both -delete and -prune without explicitly using -depth
is now an error.  Traditionally, -delete has always turned -depth on
anyway, so this is not a functional change.   However, using -depth
(implicitly or explicitly) makes -prune a no-op.  This change is
intended to avoid nasty surprises for people who test with
"-print" and then change it to "-delete" when they are happy.

#20803: POSIX requires that -prune always returns true.  Previously it
returned false when -depth was in effect and true otherwise.

#20802: If -delete fails, find's exit status will now be non-zero.
However, find still skips trying to delete ".".

** Documentation Fixes
#21635: Some of the documentation files had missing copying
conditions.   The missing files now have copying headers, and these
are compatible with each other (GNU FDL 1.2).

#21634: No copy of FDL 1.2 included with the source code

#21633: Missing copyright/license header in some documentation.

#21628: find -perm /000 matches all files rather than none, since
findutils-4.3.3.  The Texinfo documentation is now consistent with the
manual page on this point.

#21270: Formatting fixes to the xargs.1 manual page, including making
options bold instead of italic and making OPTIONS a section header
rather than a subsection.

* Major changes in release 4.3.10, 2007-11-13

** Bug Fixes

#21568: findutils gnulib code does not match the date in
import-gnulib.config.  We now check out the gnulib code via
git-cvs-pserver.

* Major changes in release 4.3.9, 2007-11-11

** Licensing

Findutils version 4.3.9 is released under version 3 of the GNU General
Public License.

** Bug Fixes

#20834: Avoid segmentation violation for -execdir when $PATH is
unset.  Assume that the PATH is safe in this situation.

#20310: configure uses hosts's support status for "sort -z" when
generating the updatedb script for use on the target.  This is
inappropriate when cross-compiling, so avoid doing that.

#20263: Compilation fix for DEC Alpha OSF/1 cc, which forbids the
ordering comparison of function pointers.

#20139: find -[acm]time -N (wrongly) includes files from N days ago,
as well as (correctly) from less than N days ago.

#20273: When xargs is successful without consuming all of stdin (for
example, with the -E option), and stdin is seekable, xargs now
correctly restores the file position, even on platforms where exit()
does not follow the POSIX rules of doing likewise.  Likewise for find
(for example, with the -ok action).

#20547: The version information printed by find, xargs, locate,
updatedb, frcode and code now complies with the GNU Project's coding
standards.

#20662: Avoid memory leak in find -name and other places affected by
gnulib dirname module.  The leak had been present since 4.3.1.

#20751: Avoid memory corruption in find -ls that has been present
since 4.3.1.

#20871: Assertion failure introduced in 4.3.3, when oldfind is invoked
in a directory where the parent directory lacks search permission.

** Enhancements

#20594: Allow fine-tuning of the default argument size used by xargs
and find at ./configure time.

#20688: The warning printed by -name or -iname when the pattern to
match contains a slash can now be silenced by -nowarn.  This warning
was originally introduced unconditionally in 4.2.21.

Translation of locate --limit problems is improved.

POSIX will standardise -path, so the documentation no longer claims
that -wholename is the 'canonical' test, and -ipath no longer
generates a warning.

** Documentation Fixes

Point out more explicitly that the subsecond timestamp support
introduced by findutils-4.3.3 introduces a change in the format of
several fields.

Also explain that when reporting a bug, you should check the most
recent findutils release first.

Introduced doc/find-maint.texi, a maintenance manual for findutils.

Added an extra worked example for find (copying a subset of files).

The locate command's manual page now has a HISTORY section.

#20951: Very bad/unclear/confusing documentation of security checks in
find -execdir

#20865: Better documentation on the fact that -delete implies -depth
and that -delete interacts badly with -prune.

#20552: Fixed typos, formatting and section ordering issues in the
find manual page.

#20529: removed spurious 'o' in description of "xargs -a" in
doc/find.texi.

#20232: The --max-database-age option of locate was added in release
4.3.3, but this file (NEWS) did not previously mention this fact.

** Translations

Updated Dutch translation.


* Major changes in release 4.3.8, 2007-06-12

** Bug Fixes

#20157: Avoid segfault in locate when run as root.  This is caused by
a buffer overrun, but at this time no exploit mechanism is known.

* Major changes in release 4.3.7, 2007-06-09

** Functional changes

Locate can now read old-format locate databases generated on machines
with a different byte order.  It does this by guessing the byte order,
so the result is not completely reliable.  If you need to share
databases between machines of different architectures, you should use
the LOCATE02 format (which has other advantages, as explained in the
documentation).

** Security Fixes

#20014: Findutils-4.3.7 includes a patch for a potential security
problem in locate.  When locate read an old-format database, it read
file names into a fixed-length buffer allocated on the heap without
checking for overflow.  Although overflowing a heap buffer is often
somewhat safer than overflowing a buffer on the stack, this bug still
has potential security implications.

This bug also affected the following previous findutils releases:

 - All releases prior to 4.2.31
 - Findutils 4.3.0 to 4.3.6.

This bug has been assigned CVE number CVE-2007-2452.

** Bug Fixes

#20128: Fix compilation error of find/tree.c on AIX with GCC.

#20005: Tests -mtime -n and -mtime +n incorrectly treated like -mtime n.

#19983: include_next causes compilation failure in findutils 4.3.6 on
non-GCC compilers

#19981: Don't call setgroups if the function isn't available.  This
fixes Savannah bug# 19981.

#19980: Don't use the functions putw() or getw() since these are not
in current POSIX.  Use the gnulib version of wcwidth() where the
system does not provide it.

#19979: Compilation errors on BeOS

#19970: Cannot cast from pointer to bool using gnulib's <stdbool.h>

#19967: Use of __attribute((__noreturn__)) makes compilation fail with
some non-GCC compilers

#19966: find should link against -lm for modf() and fabs()

#19965: Compilation failure on OSF/1 4.0; non-declaration of uintmax_t

#19948: Assertion failure O_NOFOLLOW != 0 on IRIX 6.5

#19871: Typos in find.1

#19596: Fixed this bug again, this time in the Texinfo manual (the
discussion should compare %b with %s/512, not %s/1024).

#19416: _FORTIFY_SOURCE warn_unused_result warnings

* Major changes in release 4.3.6, 2007-05-21

** Bug Fixes

#19948: Fixed an assertion failure on IRIX 6.5 (O_NOFOLLOW is defined
to 0 there).

#19923: Fixed an array overrun in groups[] array of 'locate' when run by
or as root.  This bug appears not to be exploitable.  If locate is not
installed setuid, the bug is not exploitable.  For setuid
installations, it is concievable that there could be an information
leak if the user uses the -d option or the -e option, though the
maintainer has been unable to provoke this on an x86 system.

#19871: Spurious .R directives in manpage produced error messages from
GNU troff.  This is now fixed (they are corrected to .B).

#19416: The result of I/O operations in print-related actions is now
checked, and failures are reported.  Any failure will cause find's
exit status to be nonzero.   The predicate itself will continue to
return true.

** Compilation Fixes

A variety of changes were made to allow compilation to succeed on
non-GNU systems.

#19983: Now compiles on DEC C V5.9-005 on Digital UNIX V4.0 (or at
least, should).

#19970: Compile correctly on C89 systems where the "_Bool" type is not
provided, taking into account the limitations of the gnulib
replacement for stdbool.h.

#19967: Build successfully with C compilers that don't support the GCC
 construct __attribute__((__noreturn__)).

#19966: Findutils should now build on systems which have the modf()
and fabs() functions in the maths library, -lm.  This includes some
versions of HP-UX and Solaris.

#19965: Fixed a compilation failure on OSF/1 4.0 (no definition of the
type uintmax_t).


* Major changes in release 4.3.5, 2007-05-05

** Functional changes

Updatedb can now support he generation of file name databases which
are compatible with slocate.  For some time, GNU locate has been able
to read these.

The /proc filesystem is excluded from the locate database (by
default; change PRUNEPATHS to modify this behaviour).

** Bug Fixes

#19806: The -samefile predicate might get fooled by inode reuse.  We
now hold open a file descriptor on the reference file to prevent this.

#19768: Better detection of corrupted old-style locate databases
(e.g. if the database is too short to include a complete bigram
table).

#19766: The frcode and code programs now detect write errors more
reliably.

#19371: Fix compilation failure on systems which #define open to
open64 (and similarly with the close system call).  This fixes
Savannah bug #19371, affecting AIX 5.3.

#19658: When cross-compiling, "make clean" no longer deletes the
generated file doc/regexprops.texi, because there is no way to
regenerate it.

#19391: When xargs knows that the system's actual exec limit is larger
than the compiled-in ARG_MAX, use the system's limit without
generating an assertion failure.

#18203: A duplicate report of bug #17478.

#17478: Error messages from find can garble the console.

#16378: Assertion failure if stat() returns 00000 as the mode
of a file.  This apparently can happen occasionally with broken NFS
servers.

#11668: FreeBSD extensions for time specification are now
implemented.  In fact, these were included in findutils-4.3.3.  The
change was listed as a functional change (whcih it is) and this bug
report was not mentioned.

** Documentation Fixes

The locatedb.5 manpage now documents the (default) LOCATE02 format
more clearly, and also documents the slocate database format.

The maximum and default values applying to the -s option of xargs are
now documented more clearly in the manual page.

* Major changes in release 4.3.4, 2007-04-21

** Bug Fixes

#19634: Test suite now passes (again) if "." is on your $PATH.

#19619: Findutils builds once again on Cygwin.

#19617: Nonexistent start points are (once again) diagnosed in
ftsfind.  This bug affected only findutils-4.3.3.

#19616: Fix leaf optimisation and loop detection (which were
unreliable in findutils 4.3.3).  This bug affected only
findutils-4.3.3.

#19615: find --version no longer claims to be using FTS_CWDFD when it
isn't.  This bug affected only findutils-4.3.3.

#19613: "find -L . -type f" no longer causes an assertion failure when
it encounters a symbolic link loop.  This bug affected only
findutils-4.3.3.

#19605: Issue an error message (and later return nonzero exit status)
 if a symbolic link loop was encountered during directory traversal.

#19484: bigram.c and code.c fail if the first pathname recorded begins
with a space

#19483: Inconsistent option highlighting in updatedb manpage

#18414: Tests for "find -readable" are skipped for the superuser, as
 on some systems (e.g. Cygwin with an Administrative user) users can
 read mode-000 files.

** Translations

Findutils 4.3.4 includes a translation for the Ukrainian language.


* Major changes in release 4.3.3, 2007-04-15

Fiundutils-4.3.3 was released on 2007-04-15.

** Bug Fixes

#19596: Correct the comparison in the find manpage between %b and %s
(the divisor is 512 not 1024).

#18714: In the POSIX locale, vertical tabs and form feeds are not
field separators.

#18713: Quoted but empty arguments which occur last on an xargs input
line are no longer ignored, but instead produce an empty argument.

#18554: Documented the construct  -exec sh -c 'foo "$@" bar' {} +

#18466: we now avoid this bug by limiting "-execdir ...+"
to just one argument for the time being.  There is a performance
penalty for doing this.  We hope to make a better fix in a later
release.

#18384: excess bracket in xargs --help

#18320: Zero bytes in input should give warning

#17437: Corrected the handling of X in symbolic permissions (such
as-u+w,a+X).  This change actually occurred in findutils-4.3.2, but
the NEWS file for that release didn't mention it.

#17396: find -mtime -atime -ctime does not support fractional part
(see "Functional changes" below)

#14748: find -perm /zzz gives wrong result when zzz evaluates to an
 all-zero mask

#14535: correctly support case-folding in locate (that is, "locate
-i") for multibyte character environments such as UTF-8.  Previously,
if your search string contained a character which was outside the
single-byte-encoding range for UTF-8 for example, then the
case-folding behaviour failed to work and only exact matches would be
returned.



** Functional changes

The -printf action (and similar related actions) now support %S,
which is a measurement of the sparseness of a file.

The test "-perm /000" now matches all files instead of no files.  For
over a year find has been issuing warning messages indicating that
this change will happen.  We now issue a warning indicating that the
change has already happened (in 4.3.x only, there is no plan to make
this change in the 4.2.x series).

The tests -newer, -anewer, -cnewer, -mtime, -atime, -ctime, -amin,
-cmin, -mmin and -used now support sub-second timestamps, including
the ability to specify times with non-integer arguments.

The -printf format specifiers also support sub-second timestamps:
  atime   ctime  mtime
  %a      %c     %t
  %AS     %CS    %TS
  %AT     %CT    %TT
  %A+     %C+    %T+
  %AX     %CX    %TX


The new test -newerXY supports comparison between status times for
files.  One of the status times for a file being considered (denoted
X) is checked against a reference time (denoted Y) for the file whose
name id the argument.  X and Y can be:

   a    Access time
   B    Birth time (st_birthtime, currently unsupported)
   c    Change time
   m    Modification time
   t    Valid only for the reference time; instead of comparison
        against a file status time, the argument is a time string.
        Not yet supported.

For example, -newermm is equivalent to -newer, and -neweram is true if
the file being considered was accessed more recently than the
reference file was modified.  The -newerXY test supports subsecond
timestamps where these are available.  The X=B variant is not yet
implemented.

If you configure the source code and then run the tests with "make
check", the test suite fails rather than defaulting to testing the
system binaries.

A new option, --max-database-age, has been added to locate.


* Major changes in release 4.3.2, 2006-11-25

** Bug Fixes

#18222: find -printf '%H %P' once again prints the right result if
more than one start point was given on the command line.

#17782: find -execdir now correctly puts the prefix "./" before the
expansion of "{}" rather than at the start of the argument it appears
in.  Please note that if you use the -exec or -execdir actions with a
shell, then you may be vulnerable to shell code injection attacks, so
don't do that.  It's not a security defect in find - you should not be
passing untrusted data (such as file names chosen by other people) to
the shell.

#17490: find  -regex generated a segfault in findutils-4.3.1, but this
 is fixed in findutils-4.3.2.

#17477: find -printf '%' (that is, where the format has a trailing %)
now generates an error message.

#17372: The fts-based find executable (the default configuration uses
fts) is now much faster when -maxdepth is used on filesystems with
high fanouts.

#15531: The -prune action now behaves correctly when applied to a file.

** Functional changes

The slocate database format is now supported.  Preliminary changes
intended to eventually allow setuid operation of locate have also been
made.  For the moment, please don't install GNU locate as a
set-user-ID program (except for testing purposes; if you do so, please
make sure that untrusted users cannot execute the set-user-ID locate
program).

Use of an slocate database which was built with a nonzero security
mode (at the moment, GNU updatedb will not do this) forces locate's
"-e" option to be turned on, which has an effect on the "-S" option
which is probably surprising for most users.


** Documentation Fixes

The global effect of options (other than -daystart and -follow) is now
explained more clearly in the manual page.   Savannah bug #15360.


* Major changes in release 4.3.1, 2006-08-06

** Bug Fixes

Find now follows POSIX rules for determining where directories end and
expressions start.  This means that "find \(1 \!2 \, \)" now searches
in the four named directories, rather than trying to parse an
expression. (Savannah bug #15235).

You now get a more helpful error message when you use command lines
which have missing expressions, such as
      find . ( )
      find . !
      find . -a
      find . \( -not \)
      find . \( -true -a

Savannah bug #15800: If find finds more subdirectories within a parent
directory than it previously expected to based on the link count of
the parent, the resulting error message now gives the correct
directory name (previously an error message was issued but it
specified the wrong directory).

Savannah bug #16738: "find .... -exec ... {} +" now works if you have
a large environment and many files must be passed to the -exec
action.  The same problem affected the -execdir action, though since
the number of files in a given directory will normally be smaller, the
problem was worse for -exec.

Savannah bug #16579: Updatedb now works if it is running as a user
whose login shell is not actually a shell.

There have also been a number of documentation improvements (includng
Savannah bug #16269).

** Functional changes

For find, debug output can now be enabled at runtime with the -D
option.  This causes the printing of various sorts of information
about find's internal state and progress.

The find option -nowarn cannot itself produce a warning (this used to
happen with commands like "find . -name quux -nowarn -print").

** Performance Enhancements

Find now has a rudimentary cost-based optimiser.  It has an idea of
the basic cost of each test (i.e. that -name is very cheap while -size
is more expensive).  It re-orders tests bearing in mind the cost of
each test and its likely success.  Predicates with side effects (for
example -delete or -exec) are not reordered.  The optimiser is not
yet enabled by default, but the new option -O controls the query
optimisation level.  To see this in action, try
  find -D opt -O3 . -type f -o -type c -o -size 555 -name Z
and compare the optimised query with:
  find -D opt -O3 . -size 555 -o -type c -o -type f -name Z
and
  find -D opt     . -size 555 -o -type c -o -type f -name Z

Over time, as optimisations are proven to be robust and correct, they
will be moved to lower optimisation levels.  Some optimisations have
always been performed by find (for example -name is always done early
if possible).

** Translations

Findutils 4.3.1 includes updated translations for the following
languages:
 Vietnamese, Belarusian, Catalan, Danish, German, Greek, Esperanto,
 Spanish, Estonian, Finnish, French, Irish, Galician, Croatian, Hungarian,
 Indonesian, Italian, Japanese, Korean, Luganda, Malay, Dutch, Polish,
 Portuguese, Brazilian Portuguese, Romanian, Russian, Kinyarwanda,
 Slovak, Slovenian, Serbian, Swedish, Turkish, Chinese (simplified),
 Chinese (traditional), Bulgarian

* Major changes in release 4.3.0, 2005-12-12

The 4.3.x release series are currently 'development' releases.  Please
test it, but think carefully before installing it in a production
system.  New features in findutils-4.3.x are under development; they
may change or go away.

All changes up to and including findutils-4.2.27 are included in this
release.  In addition the following changes are new in this release:

** Functional Changes

By default, find now uses the fts() function to search the file
system.  The use of fts greatly increases find's ability to search
extremely deep directory hierarchites.

You can tell that the version of find you are using uses FTS, because
the output of "find --version" will include the word "FTS".

Currently two binaries for 'find' are built.  The configure option
--without-fts can be used to select whether 'find' uses fts:

                                  With fts      Without fts
default configuration             find          oldfind
configure --with-fts              find          oldfind
configure --without-fts           ftsfind       find

New tests, -readable, -writable, -executable.  These check that a file
can be read, written or executed respectively.

* Major changes in release 4.2.27, 2005-12-06

** Warnings of Future Changes

The test -perm /000 currently matches no files, but for greater
consistency with -perm -000, this will be changed to match all files;
this change will probably be made in early 2006.  Meanwhile, a warning
message is given if you do this.

** Bug Fixes

If xargs is invoked with many short arguments on PPC systems running
the Linux kernel, we no longer get an "argument list too long" error
from the operating system.

Fixed a bug in the test suite which caused it to spuriously fail on
systems where ARG_MAX is different to the value used by the Linux
kernel on 32-bit x86-architecture systems.

On systems running the Linux kernel, "find -printf %F" no longer
produces the wrong answer for files on filesystems that have been
remounted elsewhere using "mount --bind". (Savannah bug #14921).

** Documentation Changes

Following some extensive and detailed review comments from Aaron
Hawley, the material in the manual pages and the Texinfo manual are
now synchronised.

The %M format specifier of "find -printf" is now documented, although
it has existed since release 4.2.5.

The 'find' manual page now correctly documents the fact that -regex
defaults to using Emacs-style regular expressions (though this can be
changed).

* Major changes in release 4.2.26, 2005-11-19

** Public Service Announcements

I'd like to point out a second time that the interpretation of '-perm
+mode' has changed to be more POSIX-compliant.  If you want the old
behaviour of the GNU extension you should use '-perm /mode'.  See the
NEWS entry for findutils version 4.2.21 for details.

** Functional Changes

The xargs command now supports a new option (--delimiter) which allows
input items to be separated by characters other than null and
whitespace.  This resolves Savannah support request sr #102914.

Sometimes find needs to read the /etc/mtab file (or perform the
equivalent operation on systems not using /etc/mtab).  If this
information is needed but not available, find now exits with an error
message non-zero status.  If the information is not needed, find will
not spuriously fail.

A new xargs option --delimiter allows the input delimiter to be
changed (previously \0 was the only choice unless you use the -L
option, which changes other semantics too).

** Bug Fixes

If the environment size is too large to allow xargs to operate
normally, 'xargs --help' still works (now).

If the input to xargs is a large number of very short options (for
example, one character each), earlier versions of xargs would fail
with 'Argument list too long'.  However, since this is precisely the
problem that xargs was invented to solve, this is a bug.  Hence on
those systems we now correctly use a shorter command line.  This
problem particularly affected 64-bit Linux systems because of the
larger size of pointers, although 32-bit Linux systems were also
affected (albeit for longer command lines).  In theory the same
problem could affect 'find -exec {} +', but that's much less likely
(even so, the bug is fixed there too).

Bugfix for an unusual failure mode (Savannah bug #14842) where an
attempt to allocate more space for directory contents succeeds but is
incorrectly diagnosed as a failure.  The likelihood of you
experiencing this depends on your architecture, operating system and
resource limits.  This failure has been observed in a directory
containing 35396 entries.

** Documentation Changes

The EXAMPLES section of the find manual page now correctly describes
the symbolic and octal modes for the -perm test.

The documentation and "--help" usage information for the -L, -l, -I
and -i options have been clarified (but the behaviour has not changed).

The documentation now explains more clearly what happens when you use
"-L -type l".

* Major changes in release 4.2.25, 2005-09-03

** Bug Fixes

find -perm /440 (which should succeed if a file is readable by its
owner or group) now works.  Previously there was a bug which caused
this to be treated as "find -perm 440".

Some files in the xargs test suite have been renamed to avoid problems
on operating systems whoch cannot distinguish filenames on the basis
of upper/lower case distinctions.

The software now builds on Cygwin, including the generated file
regexprops.texi.

Findutils should now build once again on systems supporting AFS, but
this support has not recently been fully tested.  Findutils should
also (once again) build on Cygwin.

** Other Changes

The test suite for find is now much more extensive.

* Major changes in release 4.2.24, 2005-07-29

** Documentation Changes

The manual now includes a "Worked Examples" section which talks about
the various ways in which findutils can be used to perform common
tasks, and why some of these alternatives are better than others.

The -I option of xargs (which is required by the POSIX standard) is
now documented.

We now document the fact that find ensures that commands run by -ok
and -okdir don't steal find's input.  Find does this by redirecting
the command's standard input from stdin.

Many documentation readability enhancements and proofreading fixes
were contributed by Aaron Hawley.

** Functional Changes

*** Functional changes in locate

The "--regex" option of locate now assumes the regular expression to
be in the same syntax as is used in GNU Emacs, though this can be
changed with the new option --regextype.  This is a change from the
existing behaviour (which was to use POSIX Basic Regular Expressions).
Since this feature is releatively new anyway, I though it was more
useful to have compatibility between regular expression handling in
find and locate than to maintain the short-lived previous behaviour of
locate.

The locate program now also supports a "--regextype" long option which
controls which regular expression syntax is understood by locate.
This is a long option and has no single-letter 'short option'
equivalent.

*** Functional changes in find

The regular expression syntax understood by "find" can be changed with
the -regextype option; this option is positional, meaning that you can
have several tests, each using a distinct syntax (this is not
recommended practice however).

The default regular expression syntax is substantially the same as
that recognised by GNU Emacs, except for the fact that "." will match
a newline.

The leaf optimisation can be disabled with the configure option
"--disable-leaf-optimisation", which is equivalent to specifying
"-noleaf" on all find command lines.  This is useful for systems
having filesystems which do not provide traditional Unix behaviour for
the link count on directories (for example Cygwin and the Solaris 9
HSFS implementation).

** Bug Fixes

*** Bug Fixes for find

The -iregex test now works once again on systems that lack
re_search() (that is, systems on which findutils needs to use the
gnulib version of this function).

find -regex now once again uses GNU Emacs-compatible regular
expressions.

If invoked with stderr closed, the -fprint and -fprintf actions now no
longer cause error messages to be sent into the output file.

If the link count of a directory is less that two, the leaf
optimisation is now disabled for that directory.  This should allow
searching of non-Unix filesystems to be more reliable on systems that
don't take the trouble to make their filesystems look like traditional
Unix filesystems.   Some filesystems don't even take the trouble to
have a link count of less than two and for these, -noleaf is still
required unless --disable-leaf-optimisation was used at configure time.

The "%Y" directive for the -printf action now no longer changes find's
idea of the mode of the file, so this means among other things that
"-printf %Y %y" now works properly.  This is Savannah bug #13973.

* Major changes in release 4.2.23, 2005-06-19

** Documentation Changes

The -L and -I options of xargs are currently incompatible (but should
not be).

Improved the documentation for -execdir and -okdir.

** Functional Changes to updatedb

File names ending in "/" which are specified as an argument to
--prunepaths (or in $PRUNEPATHS) don't work, so we now issue an error
message if the user tries to do that.  The obvious exception of course
is "/" which does work and is not rejected.


* Major changes in release 4.2.22, 2005-06-12

** Security Fixes

If a directory entry searched with "find -L" is a symbolic link to
".", we no longer loop indefinitely.  This problem affected find
versions 4.2.19, 4.2.20 and 4.2.21.  This problem allows users to make
"find" loop indefinitely.  This is in effect a denial of service and
could be used to prevent updates to the locate database or to defeat
file security checks based on find.   However, it should be noted that
you should not use "find -L" in security-sensitive scenarios.

** Other Bug Fixes

None in this release.

** Functional Changes to locate

A locate database can now be supplied on stdin, using '-' as a element
of the database-path. If more than one database-path element is '-',
later instances are ignored.

A new option to locate, '--all' ('-A') causes matches to be limited to
entries which match all given patterns, not entries which match
one or more patterns.

** Documentation Changes

Some typos in the manual pages have been fixed.  Various parts of the
manual now point out that it is good practice to quote the argument of
"-name".  The manpage now has a "NON-BUGS" section which explains some
symptoms that look like bugs but aren't.  The explanations of the "%k"
and "%b" directives to "find -printf" have been imrpoved.


* Major changes in release 4.2.21, 2005-06-07
** Functional Changes to find

The GNU extension "find ... -perm +MODE" has been withdrawn because it
is incompatible with POSIX in obscure cases like "find ... -perm ++r".
Use the new syntax "find ... -perm /MODE" instead.  Old usages will
still continue to work, so long as they don't conflict with POSIX.

If the output is going to a terminal, the -print, -fprint, -printf and
-fprintf actions now quote "unusual" characters to prevent unwanted
effects on the terminal.  See "Unusual Characters in File Names" for
further details.  There is no change to the behaviour when the output
is not going to a terminal.   The locate program does the same thing,
unless the -0 option is in effect (in which case the filenames are
printed as-is).

** Functional Changes to locate

The locate command will now read each locate database at most once.
This means that if you are using multiple databases and are searching
for more than one name, the results will now be printed in a different
order (and if you specified a small limit with --limit, you may get a
different set of results).

A new option '--print' for locate causes it to print the matching
results even if the '--count' or '--statistics' option is in effect.

** Bug Fixes
find /blah/blah/blah -depth -empty now works once again.

The -regex and -iregex tests of find now correctly accept POSIX Basic
Regular Expressions.  (Savannah bug #12999)

The updatedb program now works on systems where "su" does not support
the "-s" option, for example Solaris.

* Major changes in release 4.2.20, 2005-03-17
** Internationalization and Localization
Updated Vietnamese and Dutch translations.

** Bug Fixes
Minor bugfix affecting only those who compile from the CVS repository,
as opposed to those who compile from the source releases.

* Major changes in release 4.2.19, 2005-03-07
** Bug Fixes

find should now no longer hang on systems which lack the O_NOFOLLOW
flag to open(2) and which are clients of an unresponsive NFS server
(Savannah bug #12044).

We now avoid inappropriately failing for "find -L foo" or "find -H
foo" if foo is a symbolic link (Savannah bug #12181).  Previously we
used to fail with the error message "Too many levels of symbolic
links".

"find . -false -exec foo {} +" no longer runs an extra instance of foo
when find exits (Savannah bug #12230).

If the chdir() safety check fails but we can no longer get back to
where we started, exit with an explanatory (fatal) error message.
This does not happen on GNU/Linux and FreeBSD because the safety check
is not needed (the security problem the safety check protects against
is prevented in a cleaner way on those systems).

"make distclean" no longer deletes regex.c (which "make all" needs).

**  Functionality Changes
"find -printf "%h\n" will now print "." for files in the current directory.
Previously it printed nothing (but there was a bug in the %h
implementation anyway).  This fixes Savannah bug #12085.

Should now build (again) on non-C99-compliant systems.

** Documentation enhancements
Fixed some typos and clarified wording in "Working with automounters".

** Internationalization and Localization
New Vietnamese message translation.

* Major changes in release 4.2.18, 2005-02-16
** Bug Fixes
*** "find -depth" was missing out non-leaf directories when they contain
    non-directories.  This affected findutils releases 4.2.15,
    4.2.16 and 4.2.17, but the bug is now fixed.
*** Find no longer hangs on systems which are clients of unresponsive
    NFS servers.
**  Documentation improvements
*** Improvements and corrections to the find.1 manpage, including corrections to the descriptions of -H and -L.

* Major changes in release 4.2.17, 2005-02-08
** Bug Fixes
*** bug #11861  undefined symbol "basename" on IRIX 5.3
*** bug #11865  xargs -i regression  (as compared to findutils-4.2.12)
*** bug #11866  Typo in pred_okdir renders it useless (affecting 4.2.16 only)
*** patch #3723 fix recent process_top_path change (for -execdir on /)
*** Fixing bug #11866 and applying patch #3723 made -execdir work much better.
*** find bar/baz/ugh now works again if baz is a symbolic link (broken
    in 4.2.15).

* Major changes in release 4.2.16, 2005-02-05
**  Functionality Changes
*** Updated the message catalogues for the translated messages.
*** The subfs filesystem is now treated the same as the autofs
    filesystem is.
*** New translations:  Belarusian, Catalan, Greek, Esperanto,
    Finnish, Irish, Croatian, Hungarian, Japanese, Luganda,
    Malay, Romanian, Slovenian, Serbian, Chinese (simplified).

**  Bug Fixes
*** The -execdir action now works correctly for files named on the
    command line.

* Major changes in release 4.2.15, 2005-01-29
**  Functionality Changes
*** locate now supports matching regular expression (--regex).
*** --enable-d_type-optimization (introduced in findutils 4.2.13) is now turned on by default.

* Major changes in release 4.2.14, 2005-01-25
**  Functionality Changes
*** New options -L, -P, -H for locate.  The work in the same was as the same options for find.
**  Bug Fixes
*** Don't include the "findutils/find/testsuite/find.gnu" subdirectory in the
    distributed tar file more than once.
*** Should now build on Solaris once again.
*** -xtype and -printf %Y now work correctly for symbolic links once again
**  Documentation improvements
*** All options for "locate" are now documented

* Major changes in release 4.2.13, 2005-01-23
**  Performance Enhancements
*** On Linux and some other systems, a large performance improvement,
    because we can eliminate many of the calls to lstat() (in extreme
    cases, 99% of them).  Limited testing shows a 2x speedup on NFS
    filesystems.  Other systems which can make use of this enhancement
    include Mac OS X and *BSD.

* Major changes in release 4.2.12, 2005-01-22
**  Functionality Changes
*** find is now POSIX-compliant, as far as I know.
*** -exec ... {} + now works.
*** New actions -execdir and -okdir which are like -exec and -ok but more secure.
*** "locate -w" is now a synonym for "locate --wholepath".
*** An empty path entry in the locate database path (for example "::" in
    $LOCATE_PATH or in the argument to "locate -d") is taken to mean
    the default database, whose name is hard-coded in locate.
**  Bug Fixes
*** If find or xargs cannot write to stdout, for example because
    output is redirected to a file and the disk is full, the
    relevant program will return a non-zero exit status.

* Major changes in release 4.2.11, 2004-12-12
**  Bug Fixes
*** Compilation fix for systems without EOVERFLOW.
*** More helpful error message if you make a mistake with (, ), -o or -a.
**  Functionality Changes
*** If you have unclosed parentheses on the find command line,
    or any of a number of similar problems, find will now produce
    a more helpful error message.
*** locate -b is now a synonym for locate --basename
*** locate now supports a --statistics (or -S) option, which prints some
    statistics about the locate databases.
*** Implemented the -samefile option.
**  Documentation improvements
*** New chapter in the manual, "Security Considerations".
*** Better documentation for -prune (Mainly thanks to   Stepan Kasal)
**  Bug Fixes
*** locate's options -i and -w now work with the -e option (previously a bug
    prevented this).

* Major changes in release 4.2.10, 2004-12-06
**  Bug Fixes
*** Portability fix for fstype.c: should now compile on UNICOS, and possibly
    also produce useful results on BeOS and Dolphin, perhaps other
    systems too.

* Major changes in release 4.2.9, 2004-12-05
**  Functionality Changes
*** xargs no longer treats a line containing only an underscore as a logical end-of-file.   To obtain the behaviour that was previously the default, use "-E_".
*** xargs now supports the POSIX options -E, -I and -L.   These are synonyms
    for the existing options -e, -i and -l, but the latter three are
    now deprecated.
**  Bug Fixes
*** xargs -n NUM now invokes a command as soon as it has NUM arguments.
    Previously, it waited until NUM+1 items had been read, and then
    invoked the command with NUM arguments, saving the remaining one
    for next time.
*** If "find -L" discovers a symbolic link loop, an error message is issued.
*** If you specify a directory on the find command line, but -prune
    is applied to it, find will no longer chdir() into it anyway.
**  Documentation improvements
*** The precise interpretation of the arguments to the -atime, -ctime
    and similar tests in find has been documented more clearly.

* Major changes in release 4.2.8, 2004-11-24
*** Bugfix to the findutils 4.2.7 automount handling on Solaris.  This
    worked to some extent in findutils-4.2.7, but is much improved in
    findutils-4.2.8.

* Major changes in release 4.2.7, 2004-11-21
**  Functionality Changes
*** xargs can now read a list of arguments from a named file, allowing
    the invoked program to use the same stdin as xargs started with
    (for example ``xargs --arg-file=todo emacs'').
**  Documentation improvements
*** The Texinfo manual now has an extra chapter, "Error Messages".  Most
    error messages are self-explanatory, but some of the ones which
    are not are explained in this chapter.
**  Bug Fixes
*** Avoid trying to link against -lsun on UNICOS, which doesn't need it or
    have it.
*** Bugfix to the findutils 4.2.6 automount handling (which hadn't been enabled
    on Solaris).
*** Reenabled internationalisation support (which had been accidentally
    disabled in findutils-4.2.5).

* Major changes in release 4.2.6, 2004-11-21
**  Bug Fixes
*** find now copes rather better when a directory appears to change just as
    it is about to start examining it, which happens with automount.
    This is because automount mounts filesystems as you change
    directory into them.  This should resolve Savannah bugs #3998,
    #9043.

* Major changes in release 4.2.5, 2004-11-11
**  Functionality Changes
*** The POSIX options -H and -L are supported.  These control whether or not
    find will follow symbolic links.
*** The BSD option -P is also now supported (though in any case
    it is the default).
**  Documentation improvements
***  Better documentation for "xargs -i".
**  Bug Fixes
*** "make install" now respects DESTDIR when generating localstatedir.
    (this is only relevant if you are installing to some location
    other than the one that you indictaed when you ran "configure").
*** Compatible with automake versions 1.8 and 1.9.
*** Build problems on UNICOS now fixed, though the linker will still generate
    warnings because we try to link with the nonexistent library
    "-lsun".  Edit $(LIBS) to work around this problem.

* Major changes in release 4.2.4, 2004-11-08
**  Functionality Changes
*** If your system sort command has a working "-z" option, updatedb will
    now correctly handle newline characters in filenames (as will
    locate).
*** xargs now uses 128Kb of command line by default (less if the system
    doesn't support that much).
*** If you specify a 'find' option after non-option, a warning message
    is now issued.  Options should be specified immediately after the
    list of paths to search.  These warnings are enabled if you
    specify the -warn option, or if stdin is a tty.  They are diabled
    by the use of the -nowarn option.
*** Like find, the locate program now supports an option --null (short form -0)
    which changes the result separator from newline to NULL.
*** Locate supports the option -c (long form --count) which suppresses normal
    output but prints on stdout the number of results produced (like
    grep -c).
*** Locate supports the option -l (long form --limit) which limits the
    number of results.  This is useful if you only want to find out if
    there are copies of a certain file on the system, but don't want
    to wait for the entire locate database to be searched.
*** Locate now has an option --basename which forces the specified pattern to
    be matched against the basename of the entries in the locate
    database, rather than the whole name.  The default behaviour
    (matching against the whole name of the file including all the
    parent directory names) corresponds to the option --wholename.
*** updatedb has a new option, --findoptions, that can be used to
    pass extra options through to the find command that it uses.
**  Bug Fixes
*** "find -printf '%H\n'" now works (rather than segfaulting) on
    systems that have non-writable string constants.
*** Better POSIX compliance for the -s option to xargs (out of range
    values should just result in bounding to the correct range, not an
    error, so now we just print a warning message and adjust the
    value).
*** Corrected section numbers of manual page cross-references

* Major changes in release 4.2.3, 2004-10-30
**  Functionality Changes
*** Added new action -delete which deletes things that find matches.
*** Added new action -quit which causes find to exit immediately.
*** A new format directive '%D' for "find -printf" prints the device number.
*** The -ls predicate no longer truncates user or group names.
*** Added new option "-d" which is a synonym for "-depth" for compatibility
    with Mac OS, OpenBSD and FreeBSD.  This option is already
    deprecated since the POSIX standard specifies "-depth".
*** Added two new format specifiers to the -printf action; these are
    %y and %Y.  They indicate the type of the file as a single letter;
    these are the same latters as are used by the "-type" test.
*** If a parent directory changes during the execution of find,
    the error message we issue identifies the nature of the change
    (for example the previous and current inode numbers of the
    directory we've just returned out of).
** Other Changes
*** Non-functional code changes to silence compiler warnings.

* Major changes in release 4.2.2, 2004-10-24
**  Documentation improvements
*** "find ... -exec {}+" is not yet supported.
** Bug Fixes
*** Fixed compilation problems on Solaris, RedHat EL AS 2.1, Irix, AIX
*** Work around possible compiler bug on HP-UX 11.23 for ia64
*** The built-in internationalisation support now works again.
** Other Changes
*** We now import the gnulib source in the way it is intended to be used,
    which means among other things that we only have one config.h file
    now.
*** Functions which findutils requires but which are not present in
    gnulib are now defined in "libfind.a".  This is in the lib
    directory, while gnulib is in the gnulib subdirectory.
*** Fixed a typo in the address of the FSF in many of the file headers.

* Major changes in release 4.2.1, 2004-10-17
** Bug Fixes
*** 'find -name \*bar now matches .foobar, because the POSIX standard
     requires it, as explained at
     https://standards.ieee.org/reading/ieee/interp/1003-2-92_int/pasc-1003.2-126.html

* Major changes in release 4.2.1, 2004-10-17
** Bug Fixes
*** find -iname now works correctly on systems that have an fnmatch() function
    that does not support FNM_CASEFOLD
*** updatedb now uses signal names for "trap" instead of numbers,
    as per bug #9465 (see https://www.opengroup.org/onlinepubs/009695399/utilities/trap.html)
*** Better support for systems lacking intmax_t
** Other Changes
**** findutils now uses a newer version of gnulib (dated 2004-10-17).

* Major changes in release 4.2.0, 2003-06-14
** Functionality Changes
*** xargs now works better when the environment variables are very extensive.
    The xargs command used to run into difficulties if the environment
    data contained more than 20480 bytes.
*** New options -wholename and -iwholename
    As per the GNU Projecvt coding standard, These are preferred over
    the -path and -ipath options.  Using -ipath now generates a warning,
    though -path does not (since HPUX also offers -path).
*** The environment variable FIND_BLOCK_SIZE is now ignored.
*** New option "-ignore_readdir_race"
    silences an error messages which would otherwise occur if a file is removed
    after find has read it from the directory using readdir(), but before
    find stats the file.  There is also an option
    -noignore_readdir_race which has the opposite effect.
**  Documentation improvements
*** The -size option of find is now documented in more detail
*** POSIX compliance and GNU extensions
    The find manual page also now includes a section
    which describes the relationship between the features of GNU
    find and the POSIX standard.  Some other small improvements
    to the find and xargs manual pages have been made.
*** The argument to the -fprintf directive is now better documented.
    The escape code '\0' for the `-printf' predicate of find is now
    documented, and the documentation for the %k and %b specifiers
    has been improved.
*** xargs -i is now more clearly documented.
** Bug Fixes
*** locate 'pa*d' will now find /etc/passwd (if it exists, of course)
*** xargs standard input is not inherited by child processes
    If the command invoked by xargs reads from its standard input,
    it now gets nothing, as opposed to stealing data from the
    list of files that xargs is trying to read.
*** Better support for 64-bit systems.
*** The command "xargs -i -n1" now works as one might expect,
    I think this is a strange thing to want to do.
*** Arguments to find -mtime that are too large are now diagnosed
    Previously, this just used to cause find just to do the wrong thing.
*** updatedb is now somewhat more robust
    The updatedb shell script now does not generate an empty
    database if it fails.
*** Sanity-check on some data read from locatedb
    Locate now detects some types of file corruption in the
    locate database.
*** The %k format specifier for -fprintf now works
    This was broken in 4.1.20.

* Major changes in release 4.1.20, 2003-06-14:
** New maintainer, James Youngman <jay@gnu.org>
** As far as I know, this is the first release after 4.1.7, but I've left
   a gap just in case.
** We now use an "imported" version of gnulib, rather than including
   a copy of the gnulib code in our CVS repository.   There are no
   differences in the build instructions, though (unless you are
   building directly from CVS, in which case please read the file
   README-CVS).
** There are no (deliberate) functional changes in version 4.1.20.

* Major changes in release 4.1.7, 2001-05-20:
fix problem so that default "-print" is added when "-prune" is used.
security fixes related to directories changing while find is executing.

* Major changes in release 4.1.6, 2000-10-10:
correct bug in prune.
added --ignore-case option for locate

* Major changes in release 4.1.5, 2000-04-12:
Add support for large files

* Major changes in release 4.1.4, 2000-02-26:
bug fixes, more up-to-date languages.

* Major changes in release 4.1.3, 2000-01-27:
added internationalization and localization.

* Major changes in release 4.1.2, 2000-01-18:
None.

* Major changes in release 4.1.1, 1999-08-8:
attempt at successful compilation on many platforms after years of neglect
 "--existing" option added to locate "--prunefs" option added to updatedb

* Major changes in release 4.1, 1994-11-3:

** Distribution renamed to findutils.
** updatedb is now a user command, installed in $exec_prefix/bin
  instead of $exec_prefix/libexec.
** A few problems in Makefiles and testsuite corrected.

* Major changes in release 4.0, 1994-11-2:

** Documentation:
*** Texinfo manual.
*** Man page for updatedb.
*** Man page for the locate database formats.

** find:
*** Takes less CPU time on long paths, because it uses chdir to descend
   trees, so it does fewer inode lookups.
*** Does not get trapped in symbolic link loops when -follow is given.
*** Supports "-fstype afs" if you have /afs and /usr/afsws/include
   and you configure using the --with-afs option.
*** New action -fls FILE; like -ls but writes to FILE.

** locate:
*** Supports a new database format, which is 8-bit clean and
   allows machines with different byte orderings and integer sizes to
   share the databases.  The new locate can also detect and read the
   old database format automatically.  The new databases are typically
   30% or more larger than the old ones (due to allowing all 8 bits in
   file names).  Search times are approximately the same, or faster on
   some systems.
*** Warns if a file name database is more than 8 days old.

** updatedb:
*** Takes command-line options.

** xargs:
*** Performance improved 10-20%.
*** The EOF string is not used when -0 is given.
*** Now has a test suite.  Some minor bugs fixed as a result.

* Major changes in release 3.8, 1993-03-29:

** case insensitive versions of -lname, -name, -path, -regex:
  -ilname, -iname, -ipath, -iregex
** %F directive for -printf, -fprintf to print file system type

* Major changes in release 3.7:

** locate can search multiple databases
** locate has an option to specify the database path
** updatedb no longer goes into an infinite loop with some versions of tail

* No NEWS was kept for earlier releases.  Known release dates include:
** release 3.2, 1991-08-28
** release 3.1, 1991-08-21
** release 3.0, 1991-08-21
** release 2.2, 1991-04-05
** release 2.1, 1991-01-01
** release 2.0, 1990-11-20
** release 1.2, 1990-07-03
** release 1.1, 1990-06-24
** release 1.0, 1990-06-22
** beginning of findutils history, 1987-02-21

                        --//--
This is used by Emacs' spell checker ispell.el:

LocalWords: ansi knr strftime xargs updatedb sh fnmatch hin strcpy
LocalWords: lib getstr getline frcode bigram texi depcomp automake
LocalWords: strncasecmp strcasecmp LIBOBJS FUNC prunefs allout libexec
LocalWords: testsuite Texinfo chdir inode fstype afs fls ls EOF lname
LocalWords: regex ilname iname ipath iregex printf fprintf

Copyright (C) 1996-2024 Free Software Foundation, Inc.

Permission is granted to copy, distribute and/or modify this document
under the terms of the GNU Free Documentation License, Version 1.3 or
any later version published by the Free Software Foundation; with no
Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts.
A copy of the license is included in the ``GNU Free Documentation
License'' file as part of this distribution.
